Mirafit M200S Short Power Rack

• Mirafit M200S Short Power Rack
• With an overall height of just six feet tall this rack is ideal for
  garages or rooms with low ceilings
• The rack features the same fantastic spec as our regular M200, just
  with shorter uprights
• For customers who have no height limitations we recommend the standard
  M200. Please see notes below in relation to usability
• Powder coated finish in a choice of black or orange 
• Full length safety spotters with UHMW liners – protects against
  barbell damage
• J-Cups with UHMW liners
• Strong 60mm x 60mm steel frame
• Steel thickness ranges from 2mm right up to 6mm 
• 6mm thick steel brace plates on all uprights
• Fully adjustable – 14 levels
• 1″ diameter holes spaced at 8cm intervals
• Bolt down feet for extra stability
• Rear base bar position provides increased room for weight
  bench positioning within the cage
• Straight grip pull up bar
• Pull up bar diameter: 32mm with matt black finish.
• Suitable for use with a 7ft or 6ft international barbell. Please note
  this cage is too wide for a standard 6ft barbell
• Compatible with a range of attachments (see below)
• The foot plates are pre-drilled with 11mm diameter holes but floor
  fixings are NOT included and will vary depending on your floor type.
  For masonry floors we recommend our Floor
  Fixing Kit (sold separately)
• Specification:
• Total Height: 183cm
• Total Width: 147cm (122cm to outside of uprights)
• Total Depth: 141cm
• Internal Depth: 74cm
• Frame: 60mm X 60mm
• Net weight: 80kg / 176lbs
• Max load: 350kg

How usable is the M200S given the shorter height?

• This depends on the height of the user and the way the rack is setup
• The height to the underside of the rear cross bar is 171cm and the
  height to the underside of the pull up bar is 173cm
• For taller users this can cause issues with pullups and upright
  exercises such as squats. In particular with squats there is the
  consideration of how to rack the bar without hitting your head.
  Consider these options:
• Option 1 – You can increase clearance under the pull up bar to
  approximately 180cm by buying the optional multi-grip pull up bar available
  here (this does not change the overall height of the rack)
• Option 2 – The pull up bar can be fitted slightly further back in the
  cage to create some more room at the front. Combine option 1 and 2 for
  an even greater impact
• Option 3 – The pull up bar can be left out entirely. With this setup
  we recommend a max load of 280kg

What attachments are available?

• Weight
  storage poles (available here)
• Fractional
  plate storage poles (available here)
• Dip bars
  (available here)
• Landmine
  attachment (available here)
• Multi
  grip pull up bar (available here)
• Safety
  spotters (available here)
• Wrist
  roller (available here)
• Barbell
  Holder (available here)
• Note: Cable pulley system is not compatible with this rack

Delivery & Assembly

• This product is delivered in 3 boxes
• The courier will often not deliver all of the boxes at the same time.
  Please wait at least 48 hours for the other boxes to arrive before
  contacting us
• Assembly instructions are included
• Please note: tools required for assembly are not included but are available
  here
• During assembly pay special attention to the rear base bar which has
  two sets of holes. Ensure you follow the assembly diagrams to use the
  correct set of holes otherwise this will cause alignment issues. The
  spare holes are in place to accommodate optional weight storage poles.